How to install the manual feeder and insert cards

The Pebble printer can be configured for an option with a manual feeding tray which enables you to insert cards by the unit.
The manual feeding mode must be enabled in the Graphic tab from the printer’s Driver Properties menu.
Select “ Manual Feeder ” from the “ Feeding source   is ” menu item and choose the desired output mode.

  1. Remove the printer feeder as shown.
  2. Use the gauge and adjust it to the ‘MAX’ position.
  3. Insert the manual feeding tray in the printer as shown. Then, press on the top of the feeder until the feeder clicks audibly into its slot.
  4. Insert cards in the printer as shown.
Powered by eZ Publish™ CMS Open Source Web Content Management. Copyright © 1999-2010 eZ Systems AS (except where otherwise noted). All rights reserved.