TattooRW - How to print a test card?

 Printing a test card makes it possible to collect technical information specific to your printer and to check that the printer operates well.
We suggest you print it immediately after the initial installation of your printer. Keep this card at hand since it might be requested by your reseller.

  1. Wait until all printing jobs are over.
  2. Make sure that there is a card in the printer.
  3. Press the push button for three seconds. All panel control's LEDs go off.
  4. Press again on the push button and keep pressing.
  5. The white push button will then switch on.
  6. Release the button when the LED starts blinking.