Avansia - How to install the transfer film?

  1. Open the front cover of the printer.
  2. Remove the Transfer film cassette.
  3. Push down the pin on the top of the Transfer film cassette.
  4. Load Transfer film in the cassette. Insert the spool spindle into the feed side (grey) holder. Unwind and load onto the shaft. Finally insert the spool spindle into the winding side holder, inserting the bottom first.
  5. Attach the pin on top of the Transfer film cassette.
  6. Insert the Transfer film cassette into the printer until a “click” is heard.
  7. Turn the wheel at right and take up the film slack.
  8. Close the front cover of the printer.
  9. Press the SET key when [Push SET Key] appears on the LCD.
  10. Your printer is once again ready to use.